Free Shipping on UK orders over £90
k2 motorcycle camera



  • K2 purchases from May 2020. F and R is printed on the lens conenctor/cable. Please note that this was printed in error. Either lens can be used for front and rear as labelled on the DVR unit.
  • V.70 Firmware update (K2) 4th Jun 2020. 
  • iOS v13. If you have updated your Apple Device to iOS v13 please ensure you have the latest Innovv App and Firware version 
  • Recent Samsung Mobile Software Update affecting Wifi Connectivity. Guidance on link below

Innovv K2 Camera

To ensure 100% smooth running, keep your Innovv K2 camera system fully up to speed with the latest Firmware and App editions.

Current Release Versions:

Current Firmware Version 4th Jun 2020 K2.20200513.V0.70
How to Check your Current Firmware/App Version
Access the Innovv K2 App – Select Settings and scroll to the bottom of the page. You will find your current firmware and App version here. Please see below example.

To update to latest firmware use download firmware guide below for step by step instructions. It is advisable to also update the K2 App on your mobile device when updating the firmware. Updating to the most recent App is simple – Just delete the current App from your phone and reinstall from your App Store, Google Play etc 

New K2 Customers.

A quick start guide

We want to make getting to know and using the Innovv C5 system as easy and enjoyable as possible. We suggest that you follow this quick start guide below and take a short while and view the video below as it will be a great help before you install.

Please Pay Particular Attention To

Point 8 – Installation Hints and Tips

Point 1 – Choose Your SD Card

1. Choose your SD Card

Choose your SD Card carefully. Please purchase a quality and branded SD card that is suitable for use in a dashcamera, to ensure you have no problems. We recommend Integral U3 Cards available in our shop as these are tried and tested. Max 256gb. Guide on storage capacity below:

256GB 38 Hours
128GB 19 Hours
64GB 8 Hours

We suggest not using Standard Sandisk SD cards for the Innovv camera systems for the reason below. Their High Endurance range of cards are suitable.

1. It is not suitable for loop dashcam video recording.

2. Sandisk warranty does not cover using for Dashcam use.

Please see below statement from Sandisk.

Sandisk warranty does not cover use of the Product in connection with the following uses or devices (as determined by SanDisk): (i) normal wear and tear, (ii) video monitoring, security, and surveillance devices, (iii) internet protocol/network cameras, (iv) in-car recording devices/dashboard cameras/black box cameras.

2. Install the INNOVV K2 App

Download the Innovv K2 App to your mobile device, iPad or tablet. Available from App Store or Google Play. You can search INNOVV K2 or use QR Scanner.

Min Requirements

iOS 8.3

Android 7.0

Windows Phone Not Available

3. Insert the SD Card

Locate the slot on the DVR and Insert the SD card. The SD Card will only fit one way up, never force the SD card, just flip it over if it doesn’t easily go into the slot

4. Before Fitting to your Bike

Before full installation to your bike we advise that you familiarise  yourself with the system, get to know and understand the basics and its operation. For it to fully operate you will need to connect up all items i.e Gps and both front and rear lenses. Ensure everything is tightened and connected properly and SD card is inserted before powering up the K2 system.

Now you need to power up. You have 3 options :

1 – Fully connect the converter to your battery terminals(positive and negative) and yellow to a switched live. In line with full install guidelines

2 –  Connect up black to your negative battery terminal and both the red and yellow to the positive. This will power the unit up for the purpose of testing only. For full install the yellow will require connecting to a switched live.

3 – Connect via mains power using a micro usb lead. A good quality micro USB lead (min 1A) will be required. Note the DVR will not function correctly (i.e Wifi will not function) if you connect via USB in a computer or laptop.

Please note there will be a 10 second start delay (option 1 ) before the DVR fires up.  So don’t panic this is normal.

5.Connect to the K2 App

Now to get your DVR connected to your mobile device via WiFi. The blue light will be steadily flashing. Go to the settings on you’re your mobile device, select the Innovv wifi and insert the code 12345678 (if you change the password it must be 8 digits)Your mobile device will now be connected to the Innovv DVR and you will get a solid blue light.

If you have any issues with connection to the Innovv K2 Wifi please see below

iOS – Place you mobile device on Airplane/Flight mode and try again


With Android mobile devices (especially Samsung S9) you may encounter problems with the Wifi connection. Please follow below instructions to resolve
– Switch your mobile device onto Airplane/Flight Mode
– Enable WLAN to find INNOVV K2 app to connect
6. Sd Card Guide and Formatting

Maximum of 256gb micro sd card can be used in the Innovv camera range. A Class 10 Minimum 80mb/s U3 is advised. Please be sure to use a reputable branded card as often cheap/fake cards will potentially not operate with your camera and cause problems.

Innovv cameras require the SD card to be in Fat32 format. This is the standard format for 32gb cards or below, so these will operate straight away. 64gb to 256gb cards are generally in Exfat format and will require reformatting to Fat32. But don’t worry this is a simple process.

– Insert the SD card into your DVR and power up (ensuring lens/lenses are connected)

– Connect you mobile device via Wifi to the DVR

– Access Innovv App

– Select Settings(Center Cog icon). At these stage you will generally be prompted that card is in incorrect format and asked if you would like to reformat. Select yes. If you are not prompted continue to settings page and select format SD card toward bottom of the page

Once completed the reformat please exit the App, forget the Innovv Wifi connection in mobile settings. Reconnect again and enter the App and you should be good to go and the unit will be recording

Looking after your SD Card.

SD cards do have a limited shelf life based upon the number of hours in total are recorded over time. Quality of cards do vary a lot. It is good practice for the health of your sd card to reformat (via App) on a regular basis. Also generally speaking the larger SD cards do last a lot longer as they store a lot more video data, so therefore do not loop/overwrite as regularly as the smaller cards.

7. Check the Settings

Select the WiFi App that you have downloaded to your mobile device and you will be able to look/change settings review recordings etc. Please see the ‘Get to know your Innovv App’ below for a full tutorial on how it all works. By now you should pretty much be up to speed with the basics of the camera set up and how to use… So all that’s left to do is fully install the K2 System.

8. Installation Hints and Tips

Now its time to fully install the K2 system to your bike. Please refer to install hints and tips below. The install is pretty straight forward, just a few things to remember when planning location of DVR, Lenses and GPS Module.

Lens Cables – Be sure to plan the routing of the cables carefully to ensure that they are not damaged during or after full installation. Avoid the following

– Tight bends in the cables

– Direct heat

– Over tightening of any cable ties

Damage to a lens cable will effect the functioning of the DVR and is not covered by the warranty.

Avoid routing cables directly next to other electrical items such as TPMS. Whilst the K2 had passed EMI testing in the lab, if other items have weak interference protection this could create a problem.

Camera Lens – Please avoid any direct pressure to the lens glass when installing as excessive pressure could damage the lens.

DVR – It is very importantto secure the DVR. The microphone is located within the DVR  movement will make for poor sound quality. Also the G Sensor is located within the DVR. If you are using the G Sensor feature you will lock down too many files and will have to delete these locked files on your computer or perform a card format on a very regular basis. If not the card will fill up and stop recording.

Lens Locations – Things to consider here. The lenses have a 120 degree angle so try to pick the best location to ensure a full field of view. The ‘live’ option on the App is a great tool as you can see live what the lenses are seeing and help you fine tune. Note that you can use either length lens cables as front/back, whichever suits your bike set up.

Lens Mounts – Secure the lenses well. Vibration will effect video quality. When deciding on lens location ensure that the lens/holder can be secured down well to limit vibration as best as possible.


GPS Module Location – The module needs to be located in an external location to ensure communication with a satellite.  Ideally the module needs to be as close to horizontal as possible.We strongly suggest it is tested in desired location before securing. The module should be located at least 30cm from the main DVR unit.

9. CAN bus System

Installing your camera system via the 12v/5v conveter will not interfere with your Can bus system. The current draw from the camera power unit is very small and will not interfere with the CAN bus system. Many Innovv systems have been installed to bikes with CAN bus systems without any issue. The pick up for the switched live source is generally the tail/rear light.

However, if in the future want to add auxiliary lights, horns or other accessories or you do not want to connect the camera direct via switched live source you can look to install a CANbus controller. This makes a lot of sense as any future additions are quicker and easier to add and you will gain added functionality. Suggested CAN bus controllers are Volocan and DENALI, both offer similar functionalty. The Volocan product offers a lower price point and is perfect if you are looking at basic two wire lights.  The Denali option is a smaller form factor (easier to find a home for) and offers plug and play integration of the DENALI range of lights and Soundbomb horns etc. 

10. Connecting Camera to Canbus Controller

We get a lot of questions from customers with CAN bus controllers fitted to their motorbikes that want to integrate an INNOVV camera system. But not sure how to connect these to the CAN bus controller.

Irrespective of which CAN bus controller you have fitted, you are sure to either have a “spare port” or the ability to convert a CAN bus channel into a switched 12V supply via the user interface. The most common are DENALI and VOLOCAN. These two brands have different methods for adding accessories.

If you are using a DENALI controller you need to connect the controller to your laptop, switch the ignition on and open the web interface. Once the interface is open you simply select the “Single circuit override” for the CAN bus channel you wish to use. This turns the channel into a switched 12V live to power your accessories. See this screenshot:

The VOLOCAN controller uses a range of DiP switches to configure the unit but has a dedicated spare port that can handle a current up to 10A load. This can be used to power any accessories. The spare port is enabled when the device powers on.

So how do I connect my INNOVV Camera to the CAN bus controller?

INNOVV Cameras require a permanent battery connection and a switched live, the first thing to do is to connect the battery terminals, ensuring you have the correct polarity.

Next is the switched live connection which goes to either the spare port or to the connector for the channel you want to use. Please note that several CAN bus controllers use their own specific connectors to connect to the channels.

Depending on the brand a CAN bus controller can have specific connectors

Some controllers come with what are called “pig-tails”. These are mating connectors with wires that you can use to connect to. Other controllers come with complete sealed leads with connectors on both ends. In this case you will need to cut the lead, insulate any wires you are not using. And then connect to the positive or if required positive and negative wires directly to the accessory.

Ignition live trigger or power – which channel will you need to use?

Depending what you are connecting to the controller may well dictate which channel you need to use based on the required current. If for instance you are connecting an INNOVV camera system, you only need a 12V trigger. So a low current rated channel (rear light) is fine to use.

11. Playing/Downloading Your Video

Now for the fun part, watching your video. There are several ways in which to review your video.

1 – Via the Innovv Wifi App on your Mobile Device

Select documents on the App home page you then have 2 choices ‘ Files in Camera’ and ‘Files in device’

Files in Camera – Once selected you will see a preview list of all files currently saved on the SD card that’s inserted into the DVR. Select the file required and you can either delete, stream online or save. To stream on line you need to maintain the wifi connection with the DVR to watch the video. If you want to save your video and watch at a later time away from your bike select save. See below

Files in Device – Once you have saved the video file this is where you can review/watch the video without being connected to the Innovv Wifi. Video saved to here will not be over written by the DVR if set to loop record.

2 – Review Video on your Computer

Remove the Micro SD Card from your DVR, place into the SD Card Adapter and insert in to your computer or laptop. Open the external/flash drive that should auto populate and select the video file.

Download video files direct to your computer via a micro USB lead. Please note below

You will need to have the latest firmware version installed on your K2 DVR.

A quality Micro USB will be required similar to below link

Anker Micro USB Lead

Note – You will need a media player installed on your computer that will play MP4 files. Note – the majority of computers will have a compatible media player already installed.

GPS Data/Split Screen Viewing(Front and Rear Video). For advanced users who want to create split screen viewing, intergrating GPS data, please refer to the GPS section of our tech support page as Dashcam Viewer Software will be required.

12. Should I select MP4 or TS Video File Format

This is a personal choice. Please read and decide the best solution for your needs.

MP4 Files.

Is one of the most common used video file formats and can generally be used with most/if not all media players and video editing software packages.. Has no problem storing all GPS data collected via the K2. The weakness of MP4 is the potential of corrupted files if there is sudden or unexpected immediate power loss to the DVR. An example of the effect maybe in the event of an accident. If power is unexpectedly cut to the DVR the current file (1/3/5/10 mins) depending on loop setting selected maybe corrupted.

TS Files.

Is not such a widely used file format. For general playback there is no problem with the majority of the most common media players. Editing video is a lot more limiting, in then main the majority of customers use a converter to another file format if editing is required.

TS files are a more robust file format. For example if there is a sudden or unexpected immediate power loss to the DVR no video footage is lost, video recording are saved to the exact time of the power loss.

The dowside to TS file format is that GPS data cannot be recorded/saved. So the GPS feature of the K2 will not function.

13. Loop Recording Explained

Loop recording is a great feature for a safety camera. When selected the camera will loop record around the sd card so no need to manage video files. Fit and Forget

You will have the option of 1, 3, 5 and 10 min segments. When your SD card is full it will start to overwrite the oldest video segments first.

As an example if you are using 256gb micro sd card and you have selected 3 min segments, you will always have the last 19 hours stored on the card, segmented into 3 minute files.

If you turn loop record off, the camera will not operate once the card is full. Please note that when it is off video files are segmented into 15 minute files.

14. Forgotten Password

Easily done..

To reset the password you will need to complete a firmware update. Full step by step guide can be found on this Tech Support page. Once completed the password will be reset back to 12345678

15. Parking Mode

Parking mode is extra security when you are away from your motorcycle. If your bike is hit, moved etc this movement will trigger the G Sensor and the unit will record for a number of seconds and then switch back off again. Video files triggered by the G Sensor will appear with a padlock on them when viewed via the App or located in the Park Folder if viewing files on your computer.

For the Park Mode to be operational both this and the G Sensor need to be turned on via App settings

Please note that the Smart 12/5v converter monitors your battery level and controls the DVR.

Added indicator light

When the battery voltage is greater than 12.7V, the light is on, and the parking monitoring mode can be used normally;

When the battery voltage is less than 12.7V, the light does not light, and the parking monitoring mode cannot be used.

Other functions can be used normally in both cases

16. Smart 12/5v Converter - Bikes Battery Draw
When the bike is turned off the smart converter manages power to the DVR to ensure you experience no battery drain.
2mA when bikes battery voltage level is more than 12.7V (Converter Blue LED On)
0.08mA when bikes battery voltage is less than 12.7V. (Converter Blue Led Off)
Please note that when you battery drops below 12.7v, draw is reduced to 0.08mA. This is to protect the battery, but the Parking Mode feature will not function
17. Can the K2 system interfere with other bike accessories?
The K2 is designed to a very high specification and exceeds regulations required. However on rare occasions we have had reports that other accessories such as TPMS have been affected after installation of the K2. Of course we can’t be sure on the protection other products have. So we have now built into the App settings the option to auto turn off the wifi signal after a certain period of time. Please refer to ‘ Get to Know the Innovv App’ download below for full details.

K2 firmware:

V0.70 update 20200513

Changelog: Add the function of turning the lens flip 180°

How to update firmware:

1.  Click the above link to download the latest firmware named K2.bin to your computer
2.  Copy the K2.bin file to an SD card which shall be in FAT32 format. The file name must be the original name and other names could not work, such as K2(1).bin or K2(2).bin.
3.  Insert the Micro SD card into your INNOVV DVR.
4.  Power on your INNOVV camera system, and the firmware will be automatically updated with the red light flashing               erratically. 

Click here for more details on how to update firmware.

Once update is successful the blue light will be flashing on a regular basis appx once a second. If for any reason the update was not successful, please repeat the update.

K2 manual:

      Click here for K2 maual.

Downloads and Guides


User Manual

Download the K2 User Manual  DOWNLOAD


Lens Installation Guide

Guide to Lens Installation DOWNLOAD

Download the Latest K2 Firmware

Handy User Guide on how to update your Firmware Firmware Update Guide K2

K2.bin Firmware File DOWNLOAD

Get to Know the Innovv K2 App

Information and Advice on Using the K2 mobile APP DOWNLOAD


K2 GPS Guide

Information and Advice on installing and using the K2’s GPS