Wires and connection
Ignition trigger- yellow wire (145cm/57”)- connect to a switched power source like head light, trial light, horn.
This wire sends an electrical signal to trigger power supply for 5 Red positive (+) output leads.
Positive(+) power lead (Input)- Red wire (47cm/18 ½”)- connect to the positive point on the battery from the bike.
Ground(-) (Input)- Black wire (47cm/18 ½”)- connect to a ground point on battery or frame of the bike.
Positive(+) power lead (output)- Red wire (33cm/13”)- connect to the positive lead of the device.
Ground(-) (output)- Black wire (33cm/13”)- connect to the ground lead of all devices.
LED Indicators and Power On/Off Delay
Once the ignition is turned on/off, the connected devices/accessories will power up/off after a 10-second delay. This is to avoid power supply to devices dropping down when the engine starts/stops.
Electric Current : Input/Output
Input max is 20A. Output each wire has 3A inline fuse, this can be changed but no more than 5A. Total current for 5 wires no more than 20A.
5 x Posi-lock for 5 x red positive(+) power lead (
1 x Posi-tap for yellow Ignition trigger wire (145cm/57”) connect to
1 x Spade terminal connector for red positive(+) power lead (Input, 47cm/18 ½”) to connect to the positive
1 x Spade terminal connector for Black wire (47cm/18 ½”) connect to
1 x Spade terminal connector for Black wire (33cm/13”)- connect to the ground lead of all devices.
Connecting K2/C5 Camera via PowerHub
BUY YOUR INNOVV POWERHUB 2 TODAY WITH ABSOLUTE CONFIDENCE
UK Stock Ready for Fast Delivery. UK Point of contact for support