It’s done

The camera is installed and all parts reassembled. The best thing is – there is no screw left 

Front camera ready installed

INNOVV K2 motorcycle camera system - BMW R1200S

Rear camera ready installed

INNOVV K2 motorcycle camera system - BMW R1200S

Front camera side view with the dismounted front fairing including one headlight

INNOVV K2 motorcycle camera system - BMW R1200S

Rear camera during assembly

INNOVV K2 motorcycle camera system - BMW R1200S

Power supply connected to the battery. Plug soldered, not just jammed.

INNOVV K2 motorcycle camera system - BMW R1200S

Cable for ignition to the wire for the tail light soldered. For this purpose, carefully remove the insulation to about 1cm, at the plug the correct cable with Volmeter measured (with me the blue wire)

INNOVV K2 motorcycle camera system - BMW R1200S

DVR all connections ready. Bottom of the foam packaging glued from below for damping

INNOVV K2 motorcycle camera system - BMW R1200S

GPS module installed in the side panel on the seat, I hope my thick butt and the plastic let the signal through

INNOVV K2 motorcycle camera system - BMW R1200S